Grid View:
Quickview

Ball Joint Puller - 20mm Jaw Capacity

(0)
£9.19

Drop-forged alloy steel. Separates ball joints on steering and suspension systems. Dual adjustment screws for wide range. For use on cars and light commercial vehicles. 20mm throat depth...

Quickview

Ball Joint Separator - Long Handle

(0)
£3.92

Separates ball joint from steering knuckles. Forged to withstand hard usage. Corrosion-resistant plated finish. Knurled shaft ensures firm grip. Ideal for cars and light commercial vehicles...

Quickview

Ball Joint Separator - Short Handle

(0)
£3.54

Separates ball joint from steering knuckles. Forged to withstand hard usage. Corrosion-resistant plated finish. Ideal for cars and light commercial vehicles...

Quickview

Blind Inner Bearing Puller Set 5pce - 12 - 32mm

(0)
£32.79

Fully chromed carbon steel, medium-stroke slide hammer. Removes inner bearings using different sized collets and sliding hammer. Opens clamps by turning the handle clockwise to fit snug against the bearing. Perfect for pulling out bearings evenly without damaging parts. Bearing extractor collets with internal capacity from 12 to 32mm. Includes slid..

Quickview

Brake & Fuel Line Bending Pliers - 250mm

(0)
£13.40

Forged steel pliers with anti-corrosion finish. Bends brake and fuel lines up to 90° without distortion and features 2 precisely machined channels for accuracy when bending. Soft-grip handles to reduce user fatigue. Suitable for 3/16" and 1/4" brake lines...

Quickview

Brake Cylinder Retainer Remover - 45mm Capacity

(0)
£3.06

Hardened steel construction. Removes brake cylinder by expanding and holding retainer ring. Suitable for removal and installation of circlip locking rings on drive shafts when removing CV joint. Jaw capacity 45mm...

Quickview

Brake Piston Wind-Back Tool - Double End

(0)
£8.16

Chrome-plated, high-alloy steel. Provides quick, efficient winding back of brake pistons. Suitable for use on right-hand thread disc-brake calipers fitted to most European and Japanese cars. Includes 2-sided adaptor (32.5mm BCD x 5.8mm and 23mm BCD x 5.8mm pins)...

Quickview

Coil Spring Compressor 2pce - 380mm

(0)
£15.19

Hardened carbon steel spring compressors for fitting and removing shock absorbers. Electroplated rust-resistant black phosphate finish. Sliding and threaded jaws for quick positioning. Coarse thread prevents stripping. 1/2" drive or 21mm hex compatible. 300mm capacity...

Quickview

CV Boot Clamp Pliers (Ear Type) - 240mm

(0)
£4.46

Hardened carbon steel pliers with phosphate electroplated surface for corrosion resistance. For installing clamps on fuel filters, waterpumps, cooling systems and CV boots. Suitable for all ear-type clamps. PVC handles for grip and comfort...

Quickview

CV Drive Shaft Boot Pliers - 240mm

(0)
£9.19

Hardened steel CV boot-clamping pliers, electroplated for corrosion resistance. Crimps and flattens clamp-on, ear-type CV joint boot clamps. 3/8"sq section holes in the handle shafts enable a torque wrench to be used with the tool when required. PVC-coated handles for grip and comfort...

Quickview

CV Joint Banding Tool - 230mm

(0)
£5.90

Carbon steel banding tool for installation and tightening of band-style clamps on CV joint boots and power steering rack and pinion steering gear boots. Built-in cutter cuts the band by flipping the tool lever forward. Large, comfortable handle...

Quickview

Disc Brake Piston Spreader Tool - Universal

(0)
£8.88

Essential tool for retracting brake piston to allow insertion of new brake pads. For use on opposed-fixed and single-piston sliding calipers. Ensures parallel piston retraction, avoiding damage to piston seals. Also suitable for most ATE, Bendix, Delco and Girling calipers. Jaw capacity 88mm. Can be used with a 21mm spanner or 1/2" square drive...

Quickview

Hose Clamp Plier Set 2pce - 220mm / 8-1/2"

(0)
£8.75

Includes plier with V-slot jaws and plier with cross-slot jaws for fuel and coolant pipe spring clips and ring-type hose clamps. Non-slip grips. Fingertip position lock makes it easy to remove radiator hoses. Jaw capacity 40mm...

Quickview

Hydraulic Brake Hose Clamp - 10 - 20mm Jaw Capacity

(0)
£2.12

Hardened and tempered steel clamp with one-handed action for clamping hydraulic pipes such as break hoses. Vinyl-dipped handles for comfort. Electroplated finish...

Quickview

Pipe Flaring Kit 9pce - 9pce

(0)
£11.21

Carbon steel dies with chrome-plated flaring bar and flare press. Suitable for single or double-lap flares in soft copper and aluminium pipes. Includes: flaring bar, 45° screw-type flare press, and 7 x double-flare dies: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8". Plastic storage box...

Showing 1 to 15 of 21 (2 Pages)